Audio debugging course

Views: 0 Author: Site Editor Publish Time: 2021-05-05 Origin: Site

Inquire

When testing the sound, you can adjust the buttons slightly in the range of 20-20KHz, and constantly record the voice comparison of the volume of each node. Under the rated sound, you can debug the equalizer, different people have different habits of the sound color of the music, and you can adjust it to the appropriate level according to their hobbies.

Microphone testing is also a key step. There are two types of microphones: wired and wireless. You need to set the corresponding frequency modulation channel, and different channels correspond to different microphones. You can start to modulate from a low voice, and gradually improve your own voice and make records.

Connect with the adjustable Bluetooth mode, try different music modes, choose different environments to try the effect, and check whether the microphone output and volume are in harmony.

Related News

Home Theater Tips

For home theater, the decisive factor in home theater must be the subwoofer. It can be said that the subwoofer is the soul of the entire home theater. Why do you need a subwoofer?1. In audio, the low-frequency part consumes the most power when reproducing it, especially the low-frequency part below
Simply share some knowledge about tube amplifiers

Simply share some knowledge about tube amplifiersTube amplifiers operate at high voltage and low current. The screen voltage of the final power amplifier tube can reach 400-500V or even thousands of volts, while the current flowing through the tube is only tens to hundreds of
Three Factors Affecting the tube amplifier

Three Factors Affecting the Gallbladder SystemDoes the integrated tube amplifier need to add a preamplifier? Many enthusiasts have such questions. There are three factors here. One is whether the signal output by the audio source is large? The output signal of many foreign CD players is relatively s
Uncover the secret of great vacuum tube sound

Do you also like to listen to vacuum tube speakers? The pleasant sound it produces comes from the vacuum tube circuit, and many factors are taken into consideration to achieve such a pleasant sound quality. The author will share with us his experience in self-study of vacuum tube circuit technology,
Why tube amplifiers don’t deserve to be called “hi-fi” audio equipment?

Why tube amplifiers don’t deserve to be called “hi-fi” audio equipment?What should I do if the final sound of the amplifier is unpleasant?Use tubes for the preamp!Once a power amplifier uses vacuum tubes, it basically falls out of the category of "highly faithful audio"!Don't jump, grab the ground w
What is stereo sound equipment and what are its advantages over mono?

The basic composition of the listening system and the selection of amplifiers and speakersFirst, let’s talk about the composition of a complete system. Simply put, it can basically consist of the following three parts:Audio source, amplifier, speakers.Sound source:Regardless of digital or analog sig
How powerful should the audio amplifier be?

How powerful should the audio amplifier be?In a sound system, using a power amplifier properly is not as simple as you think. It is really necessary to discuss it.1. What power amplifier should be used? Generally, before choosing a power amplifier, the first problem you e
Do you know the four common surround sound processing systems in home theaters?

1. SURROUND decoding virtual surround sound technology and chipQsurround is currently a relatively new set of sound processing systems that can perform sound field processing on ordinary discs (stereo) and simulate Dolby surround sound effects, which is suitable for all sound sources.2. Dolby AC-3 s